How does the X50 baler work?
Time-saving and easy waste handling
- Fill your plastic or cardboard waste into the baler.
- A full-light indicator tells you when the chamber is full.
- Tie off and eject the finished bale.
- Remove the bale and store until collection.
As quiet as an air conditioner
Connect, monitor and analyze your equipment
Make the most of your equipment with our IOT solution. We call it BRA-IN, Bramidan Intelligence. Faster and better decisions, reducing your costs of operation while minimizing your impact on the environment. Access through the BRA-IN Webportal or App.*
*Requires active subscription, availability may vary from country to country
Who uses our vertical balers?
Many types of customers use our balers for compaction of waste:
Questions asked about this baler
There are different baler models available to tackle different kinds of waste streams – and you might be surprised about just how many types of waste that you can put in a suitable baler.
We supply balers to compact:
• Cardboard and paper
• Soft plastic and plastic packaging
• Plastic PET bottles
• Plastic trays and containers
• Aluminium and foil i.e. tins and cans
• Fibrous materials, e.g., cotton and wool
• Drums and barrels
• Expanded plastic (EPS)
• General production waste
• Shredded waste
Please ask our sales consultants about a baler solution for your specific waste streams.
Yes, you can compact aluminium waste in our X30 and X50 balers.
To get the tightest bales, it is important that the aluminium is compacted very hard from the very first press cycle. Our X-series balers have long internal cylinders and can reach the bottom of the baler with a very hard press force. This is called a long stroke. The result is optimally compressed aluminium waste, even if the baler is almost empty.
We recommend that you put a layer of cardboard on the top and at the bottom of the bale to keep it stabile. You may also benefit from wrapping plastic film around the finished bale.
This we would need to investigate deeper based on the specific material. In some cases, it is possible in our X models. However, it might need to be shredded before compaction.
Please consult one of our sales specialists if you want to compact these materials.
Questions? Get in touch today
Fill in the form and we will contact you.