Balers for small spaces
Compact machinery with uncompromised power
Space constraints shouldn’t prevent efficient waste handling. Whether you’re operating a small shop, a busy warehouse, or a production site with narrow corridors, Bramidan offers space-saving balers that transform your internal logistics.
Our vertical balers are engineered to handle cardboard, plastic, paper and other dry recyclables. And thanks to their compact design – some with no external cylinders – many models can be placed directly against a wall or beneath low ceilings. This makes them ideal for backrooms, storerooms, and areas with minimal floor space.
Looking for even more flexibility? Choose a vertical baler with a sliding door (SD) to allow loading from the front or side, helping you save space and work more efficiently in narrow rooms.
Recommended machinery for tight spaces
These space-efficient waste balers are ideal for retail shops, supermarkets, logistics centres and small production areas. All models feature low noise levels, easy operation and safety compliance – making them perfect for staff-operated environments.
Baler B4
Baler X10
Baler X25
Balers that can be placed against a wall
For instance, front-mounted strap holders make it easy to tie and eject bales, even when the baler is placed in a tight corner. These balers are also easy to access and operate, even when space is limited.
Baler B4
Baler B5 Wide
Baler B20
X-Series Machinery – A different cylinder design
Despite the reduced height, these vertical balers deliver high compaction ratios and are built for heavy-duty performance. They’re suitable for large volumes of cardboard, shrink wrap and other recyclables – and offer long stroke and fast cycle times for better productivity.
Baler X10
Baler X25
Baler X30 LP
Choosing the right door configuration
Sliding doors (SD)
Sliding doors stay open during loading, making them ideal for high-frequency waste input. Once the chamber is full, the operator pulls the door down manually to start the press cycle — and when the cycle ends, the door opens automatically.
- Always open for quick and easy loading
- Reduces contact with door handles and moving parts
- Great for frequent or continuous waste input
- Available on B30 Wide SD, B50 SD, B50 XL SD
Standard door
Our standard door configuration on all Bramidan vertical balers opens manually to the left and is simple, safe and easy to operate — ideal for conventional setups where space is not restricted.
- Easy to use and familiar for most operators
- Reliable and low-maintenance
- Suitable for most waste types and volumes
- Available on all vertical balers
Automatic doors
The automatic door option is designed for high-efficiency operations. It opens and closes automatically during each cycle, eliminating the need for manual door handling. This ensures fast, hands-free loading and maximises productivity and operator comfort.
- Fully automated for high-throughput workflows
- Minimises manual effort and risk of strain
- Ideal for cardboard and repetitive waste types
Can I install the baler outside?
Yes – in certain cases, installing your vertical baler outdoors is possible. However, specific precautions must be taken to protect both the machine and the operator, especially under European climate conditions.
While indoor placement is generally preferred for ease of access, temperature control, and protection against the elements, outdoor installation may be suitable if space is limited or if the baler needs to be located near an external waste area.
To ensure long-term reliability and safety, consider the following when installing a baler outside:
- The machine must be sheltered under a permanent roof or canopy to prevent rain, snow and moisture from damaging the electrical components.
- If the baler is exposed to cold temperatures, hydraulic oil rated for low temperatures should be used to prevent thickening and system failure.
- The baler should be placed on a stable, flat concrete surface with safe operator access and clearance for loading/unloading.
- Electrical components must be protected from water ingress – we recommend weather-resistant (IP-rated) enclosures and regular inspections for corrosion.
- Local safety guidelines and electrical codes must be followed, especially when working outdoors with industrial machinery.
Not sure if your baler is suitable for outdoor use? Contact our technical team – we’ll help assess the site and recommend the right setup for your needs.
Periodic Inspections & yearly maintenance
To keep your baler running safely and efficiently, regular maintenance is essential. Routine service not only minimises the risk of breakdowns but also extends the life of your equipment and ensures continued compliance with health and safety regulations.
We suggest periodic inspections and yearly preventive maintenance to ensure your machinery is functioning optimally.
Here’s what a typical annual service visit from a certified Bramidan technician includes:
- Full inspection of hydraulic components and wear parts
- Hydraulic oil check and replacement if necessary
- Functional testing of safety devices (emergency stop, door locks, sensors)
- Inspection of electrical systems and control panel for faults
- Pressure testing and compaction cycle adjustment
- Operator guidance and maintenance tips
Why regular maintenance matters:
- Avoid expensive repairs due to wear or overlooked issues
- Ensure safe operation for your team
- Maintain optimal compaction ratio and energy efficiency
- Stay compliant with EN safety standards (e.g. EN16500)
All Bramidan balers are built for durability – but like any industrial machine, they work best when properly maintained. For maximum convenience, we offer flexible service contracts and can tailor a plan to suit your site, waste volume and usage frequency.
Want to take maintenance off your to-do list? Equip your baler with BRA-IN for real-time alerts, remote diagnostics and detailed performance reports – so you stay in control of your waste management.
Questions? Contact us today
