Highlights and product features

Static compaction – maximum container capacity

In static compactors, the press unit and the container are installed as separate units. Only the container is picked up for emptying. Container capacity is approx. 50% larger compared to a mobile compactor solution.

Solutions for every need

Our two small models, RHD & SAN, are suitable for large amounts of waste, but their compact design mean that they require very little space. Loading options can be adjusted to individual needs.

SHD-RHD-SAN - Static compactors for many waste types:

  • stop Separate press unit and container unit
  • stop 50% more capacity compared to mobile solutions
  • stop The recycler only transports the container
  • stop Large feeding opening for easy waste handling
  • stop Short cycle time – constant flow
  • stop Maximum press force for optimal waste compaction
  • stop Easy emptying ensured by the conic design
  • stop Tailored options available

How does a stationary compactor work?

  1. Fill your waste into the opening.
  2. A horizontal press plate compacts your waste material.
  3. You are notified when the compactor is full.
  4. Your waste collector picks up the container unit.
  5. The empty container is returned to its place.

Models in this range

SHD

Long design 3400-7180 mm (ex. container)
Pressure force 30-40 T
Container volumen 16-30 m3

file_download Brochure
file_download Dimension sheet
file_download Dimension sheet

RHD

Short design 1970-3200 mm (ex. container)
Pressure force 30-40 T
Container volumen 16-30 m3

file_download Brochure
file_download Dimension sheet

SAN

Short design 2520 mm (ex. container)
Pressure force 29 T
Container volumen 16-30 m3

file_download Brochure
file_download Dimension sheet

Advanced Control Unit ensures optimal operation

Our software minimizes downtime and optimal filling with lowest possible energy use. Integrated modem enables automated pick-up, remote trouble-shooting and access to BRA-IN web-portal.

66%

Less Power Consumption

20%

More Waste per Load

20%

Saved Transports*

*All numbers are based on actual cases, own conditions apply and SIM subscription required

Safe and easy to operate

Our equipment has the highest level of safety
Don't settle with less!


Optional Extras

Feed your compactor through a chute

Make your work more efficient by loading waste through a chute that feeds from the inside of the building to the outside compactor.

Empty your bins directly into your compactor

Integrate an automatic tipping system for fast and secure bin emptying. Due to the special design, bins and waste containers with different dimensions can be tipped easily.

Make your container easy to pick up and return

Add guiding rails in the floor for easy and repeated placing of your container to your compactor/press unit. They help the container slide into place.

Pre-compaction plates increase density inside your container

Two-step compaction. The plate pre-compacts the material before it enters the compactor. This removes air pockets from the material for a denser compaction.

Buy or rent?

  1. Buy - you own it.
  2. Rent - for a time-limited period.
  3. Rent - with buy-back option.

You can always combine with service packages for easy administration.

Read more

Service & maintenance

The right level of service is key to low operating cost over time.

We recommend that you make a service agreement to protect your investment. Contact us, we offer several service packages.

Read more

Who uses our static compactors?

Many types of customers use our static compactors for waste handling:

Retail Stores

Webshop – Own Distribution

Distribution & Warehouse

Industry & Manufacturing

Fast Food Chains

Recycling Stations

Waste Handling Companies

Public Sector


Questions asked about mobile compactors

Because it consists of two separate units, the capacity of the container is approx. 50% larger in a static compactor than in a mobile compactor. This makes the static compactor suitable for very large amounts of waste. A static compactor also enables continuous feeding because once a full container is removed for emptying, a replacement container is instantly put in its place. This eliminates waiting time and counters waste heaps.

Another benefit of the static container is that, because it is a static solution, it can be integrated into an existing building or site with hoppers, feeders and solutions for automation.

Whether you need a static compactor or a mobile compactor depends on a number of factors. What you need to consider is how much waste you have, what kind of waste material you have, your internal work processes, how much space you have for a compactor solution, and if the solution should be integrated in an existing facility.

Before installing your static or screw compactors you need to prepare some structural or site adaptions.

The compactor must be installed on a solid, leveled ground. The press unit must be properly installed by being bolted to the ground, which must be concrete or pavement, or by being bolted to the building.

You also need to lay out guiding rails in the floor to make sure the container unit is positioned correctly on the press unit. Finally, you need to make sure that you have the correct electrical connection in place.

Our experienced team of consultants can help you clarify what you need to take into account and what you need to prepare to get the best start with your compactor.


Questions? Get in touch today

Mette Nielsen

Sales Coordinator

phone+45 7517 3266

mailbramidan@bramidan.dk

Mette Nielsen

Fill in the form and we will contact you.

keyboard_arrow_up